Magazine:
Model Railroader 1981-07
Category:
Structures - Industrial
The center fold-out of this issue is a complete scaled drawing of a group of multi-story industrial buildings found in one block in Binghamton, N.Y. Includes prototype photos, as well as a trackplan with dimensions.
Magazine:
Model Railroader 1977-01
Page:
72
Category:
Structures - Engine Servicing
The author shows how he built a railroad yards crane in both O- and HO-scale. The article includes model photos, and scaled and detail drawings.
Magazine:
Model Railroader 2001-06
Page:
89
Category:
Structures - Depots/Stations/Yards
A description of this freight house located in Canton, Pennsylvania on the PRR's former Elmira Branch. Includes photos and scaled drawings.
Magazine:
Model Railroader 2010-04
Page:
67
Category:
Structures - Trackside
This article describes the construction of a hand-operated interlocking device to protect a shortline junction near Caledonia, N.Y. Includes scale drawings and prototype photos.
Magazine:
Model Railroader 1979-11
Page:
106
Category:
Structures - Trackside
A brief article with a prototype photo and scaled drawings of the shanty in Erie, Pennsylvania.
Magazine:
Railroad Model Craftsman 1977-04
Page:
54
Category:
Structures - Bridges
A step-by-step discussion of the construction of a typical steel bridge is prefaced with comments on prototype bridge design standards and a review of the author's modeling techniques. Includes scaled drawings, model and prototype photos, and tables for determine the dimensions of the bridge based on the span it is supposed to cover.
Magazine:
Railroad Model Craftsman 1977-05
Page:
37
Category:
Structures - Bridges
This installment covers the construction of the main girders and the interior bracing pieces which provides most of the sub-assemblies for the steel bridge. Includes lots of scaled drawings, construction photos, and a table for girder dimensions.
Magazine:
Railroad Model Craftsman 1977-06
Page:
36
Category:
Structures - Bridges
In this final installment, the author concludes by tying the girders together and adding the deck, ties, and rails to complete the bridge. Includes construction photos, diagrams, and one prototype photo (repeated from Part 1).
Magazine:
Model Railroader 1979-08
Page:
90
Category:
Freight Cars - Box Cars
Scale:
O
The author super-details a Reynolds 40-foot box car to make one for the Fonda, Johnstown & Gloversville RR. Includes a drawing of the underbody details, side skirts, steps, ladders, grab irons, doors, tack boards, ends hardware, poling pockets, brake platform, and brake details. Also includes a prototype photo.
Magazine:
Model Railroader 1978-08
Page:
69
Category:
Passenger Cars
Prototype photos and scale drawings accompany this short article on the car.
Magazine:
Model Railroader 1999-11
Page:
88
Category:
Structures - Trackside
The modern-day loader is located on a farm and is used to load corn and soybeans into hoppers. Consisting of not much more than a duct and the structural members to hold it up, it makes a small track-side industry to model. Includes many prototype photos and scale drawings.
Magazine:
Model Railroader 1983-07
Page:
60
Category:
Structures - Trackside
Includes prototype photos and scale drawings for both structures. They are modeled after the ones found in the Coxton Yard of the Lehigh Valley RR in Coxton, Pennsylvania.
Magazine:
Model Railroader 1978-03
Page:
73
Category:
Structures - Engine Servicing
This brief article is about scale drawings of a Canadian Pacific icehouse.
Magazine:
Model Railroader 2002-05
Page:
84
Category:
Scenery - Trackside
A brief article with prototype and scale drawings of these telltales.
Magazine:
Model Railroader 1982-07
Page:
74
Category:
Structures - Bridges
This brief article is accompanied by prototype photos and scaled drawings.
Magazine:
O Scale Trains 50 May 2010
Page:
53
Category:
Structures - Depots/Stations/Yards
Information, photos, and a scale drawing of this small depot.
Magazine:
Model Railroader 1999-04
Page:
80
Category:
Structures - Trackside
This article describes a TOFC ramp and a team track ramp, with a prototype photo of each as well as scaled drawings.
Magazine:
Model Railroader 1978-01
Page:
107
Category:
Structures - Trackside
One prototype photo and scale drawings accompany this one-page article about the water tank.
Magazine:
Model Railroader 1981-12
Page:
106
Category:
Structures - Industrial
A brief article accompanied by scaled drawings, as well as a typical set-up next to the track.
Magazine:
Model Railroader 1985-03
Page:
74
Category:
Structures - Engine Servicing
The scaled drawings that accompany this brief article have some interpretation done by the author, because only the main structure of the 40,000-gallon water tank remains.
Magazine:
Model Railroader 1978-01
Page:
57
Category:
Structures - Depots/Stations/Yards
Scale drawings and one prototype photo of the unloader found at New York Central's Little Ferry in Ridgefield, N.J.
Magazine:
Model Railroader 1978-02
Page:
89
Category:
Structures - Depots/Stations/Yards
A one-page article about a boxcar converted into a welding shop. Includes prototype photos and scale drawings.
Magazine:
Model Railroader 1990-06
Page:
68
Category:
Structures - Depots/Stations/Yards
Prototype photos, scale drawings.
Magazine:
Model Railroader 1983-12
Page:
99
Category:
Structures - Industrial
This is a brief article describing this company in Windsor, New York, and includes prototype photos and scaled drawings. The structure has a footprint of 50' wide and only 16' deep. It only has one door.
Magazine:
Model Railroader 1977-09
Page:
71
Category:
Structures - Trackside
Scale:
HO
The author describes how he built a portable coal unloader scene on his layout. Includes one prototype photo and several layout construction photos.
Magazine:
Model Railroader 2002-09
Page:
82
Category:
Structures - Depots/Stations/Yards
Wood-frame construction depot with prototype photos and N-scale drawings.
Magazine:
Model Railroader 2004-09
Page:
64
Category:
Structures - Industrial
Coal trestle and office. This is where coal was delivered via rail to the local areas from where homes and offices purchased their coal. Includes prototype photos, 1:320 scale drawing, and textual description of how to build this structure.
Magazine:
Model Railroader 1978-01
Page:
122
Category:
Model Railroad Shows
In January 1978 Kodak held a 10,000 square-foot exhibit showcasing railroad, with a significant amount of that space dedicated to model railroading. The author describes the show and includes some photos of the exhibit.
Magazine:
Model Railroader 1988-01
Page:
106
Category:
Railroads
A modern shortline in north-eastern Pennsylvania run by the Delaware Otsego System. The article is accompanied by area maps, many prototype photos, historical information, tables listing the industries served, train listings, and a proposed HO-scale track plan for building this railroad.
Magazine:
Model Railroader 1996-10
Page:
107
Category:
Structures - Depots/Stations/Yards
This article describes the New York, Ontario & Western freight house in Utica, N.Y., and includes prototype photos, scale drawings, and a track plan.
Magazine:
Model Railroader 1979-03
Page:
122
Category:
Structures - Trackside
Drawings and prototype photos accompany this article which describes how the train order holder was used.
Magazine:
Model Railroader 1976-11
Page:
68
Category:
Freight Cars - Tank Cars
A brief history, prototype photos, and scaled drawings of this 8,000-gallon tank car.
Magazine:
Model Railroader 2000-01
Page:
134
Category:
Structures - Depots/Stations/Yards
A magnificent station reborn as a museum and tourist railway terminal. Includes prototype photos and scale drawings.
Magazine:
Model Railroader 1983-11
Page:
82
Category:
Structures - Industrial
Prototype photos, a brief description, and scale drawings of this crane.