
Magazine:
N-Scale 2000-07/08
Page:
24
Author:
Louis Fols
Category:
Layouts
Scale:
N
A two-level layout in a 12' x 16' area. Close-up photos of various industries.
Magazine:
N-Scale 2000-07/08
Page:
28
Author:
Brian F. Reynolds
Category:
Freight Cars - Flat Cars
Scale:
N
The author built a 89'4" flat car with stake pockets from a cast metal flat car by JnJ Trains. Photos only show the finished product.
Magazine:
N-Scale 2000-07/08
Page:
30
Author:
Joseph & Clayton Barry
Category:
Model Railroads and People
Father and son work together because of the Web.
Magazine:
N-Scale 2000-07/08
Page:
31
Author:
Jim Fitzgerald
Category:
Modules
Building a larger NTRAK layout using two end loops (E3 and E4), and three straight modules with lots of switching possibilities. This layout would be 2' x 19'. Another diagram is shown for a show layout using four corner sections and six straight sections, making a layout that is 6' x 20'.
Magazine:
N-Scale 2000-07/08
Page:
32
Author:
Jake Schultz
Category:
Layouts
Scale:
N
The author describes how he built a dining room table that has a layout built into it, modeled after a prototype scene.
Magazine:
N-Scale 2000-07/08
Page:
38
Author:
Damian Kostron
Category:
Freight Cars - Hoppers
Scale:
N
Modifying Rapido couplers to create I-beam couplers to permanently couple ore cars. The prototype did it that way also. The article shows before, construction, and after photos.
Magazine:
N-Scale 2000-07/08
Page:
39
Author:
Joe Valerio
Category:
Freight Cars - Hoppers
Scale:
N
Mounting MT 1060/1065 body mounted couplers to the Atlas ore cars for close-coupling, while still allowing the cars to be uncoupled. Shows construction photos.
Magazine:
N-Scale 2000-07/08
Page:
40
Author:
Mike Langford
Category:
Tools
Upgrading the spray booth with an easy-to-remove furnace filter, rather than the manufacturer's suggestion of duct-taping the filter in place.
Magazine:
N-Scale 2000-07/08
Page:
42
Author:
Gregg Scott
Category:
Locomotives - Steam
Scale:
N
Taking a Kato Pacific Japanese 4-6-2, converted with GHQ's W-3 conversion kit, to build a NP Pacific.
Magazine:
N-Scale 2000-07/08
Page:
46
Author:
Robert D. Turner
Category:
Model Automobiles and Trucks
Scale:
N
Building a scale crane using parts from various companies. Includes a discussion about properly sizing and using the crane to match the modeled circumstances.
Magazine:
N-Scale 2000-07/08
Page:
50
Author:
Bob Kendall
Category:
Electronics
Scale:
N
This article shows, in great detail, how to construct a scale barricade with a blinking LED. Also includes information about making some changes to the circuit to obtain different results.
Magazine:
N-Scale 2000-07/08
Page:
54
Author:
Robert L. Hundman
Category:
Structures - Industrial
Scale:
N
This installment shows the converting the mine to a common, transition-era coal mine. Many detailed construction photos.
Magazine:
N-Scale 2000-07/08
Page:
58
Author:
Dave LaFontaine
Category:
Layout Construction
Building a box that can hold a fold-down table so that the layout can be flipped out of the way when not in use.
Magazine:
N-Scale 2000-07/08
Page:
60
Author:
Brian F. Reynolds
Category:
Scenery - Trackside
Scale:
N
14 steps to building a working semaphore. Detailed photos accompany the text. Instructions support both upper quadrant and lower quadrant type of semaphores.
Magazine:
N-Scale 2000-07/08
Page:
64
Author:
Jerry Green
Category:
Modules
Scale:
N
Building modules with a visual continuity modeled after the Pacific Northwest as part of the club.
Magazine:
N-Scale 2000-07/08
Page:
68
Author:
Robert D. Turner
Category:
Trains
Scale:
N
Modeling modern Canadian Pacific coal trains.
Magazine:
N-Scale 2000-07/08
Page:
72
Author:
Don Ledger
Category:
Scenery - Trees, Shrubs, Bushes
Scale:
N
Modeling pine tree forests. Detailed instructions, photos, and diagrams for building foreground sisal pine trees.